Govseer

Guides / US · Canada · SDS

The 19 November 2027 HCS 2024 deadline: who it affects and what to do before it

Updated 15 November 2026 · Not legal advice

By 19 November 2027, manufacturers, importers and distributors in the US must have updated their safety data sheets and labels for mixtures to OSHA's 2024 Hazard Communication Standard (HCS). The date for substances, 19 May 2026, has passed. Until 19 November 2027, a mixture's sheet and label may follow either the 2012 or the 2024 version of the standard.

The dates

WhoSubstancesMixtures
Manufacturers, importers and distributors (sheets and labels)19 May 202619 November 2027
Employers (workplace labels, written programme, training)20 November 202619 May 2028

OSHA moved these dates by a final rule published on 15 January 2026.

Does the deadline affect you?

It does if all three are true:

Employers who only use the products have later dates: 19 May 2028 for mixtures.

The same date matters in Canada

Canada amended its Hazardous Products Regulations (WHMIS) in 2022, and the transition ended on 14 December 2025. Health Canada promotes compliance until 19 November 2027, then enforces on a risk basis. The two rules are close but not the same: a sheet written for the US still needs the Canadian requirements, including French, before it is used in Canada.

What a mixture's sheet and label need by then

The full guide to HCS 2024 and WHMIS covers what changes in each country, including the shorter labels allowed on small containers.

What to do before 19 November 2027

  1. List the mixtures you will still sell after 19 November 2027.
  2. Find the sheets still in the 2012 format.
  3. Check sections 2, 3, 9 and 11 of each sheet against the 2024 content.
  4. Check withheld concentrations. An exact figure or a free range needs replacing with one of the 13 prescribed ranges.
  5. Compare each label with section 2 of its sheet.
  6. Ask your suppliers for updated sheets where you import or distribute products you don't formulate.
  7. For Canada, check there is a French version of the sheet and the label.
See what your sheet is missing

The free SDS checker reads a safety data sheet and shows, section by section, what it is missing under HCS 2024 and the amended WHMIS rules, with the source of each finding. The sheet is read once and not stored.

Check a sheet free

To keep a register of sheets and send suppliers every fix, see SDS Gap Check.

Sources
  1. Hazard Communication Standard, final rule, 89 FR 44144 (20 May 2024)
  2. Hazard Communication Standard, compliance dates, final rule (15 January 2026), 29 CFR 1910.1200(j).
  3. 29 CFR 1910.1200, Hazard Communication, paragraphs (f)(11), (f)(12), (i)(1) and Appendix D.
  4. OSHA: Hazard Communication Standard questions and answers (2026)
  5. Health Canada: amendments to the Hazardous Products Regulations
  6. Hazardous Products Regulations, SOR/2015-17, section 4.4.1 and Schedule 1.

We check these sources every week and update this page when they change.