Guides / US · Canada · SDS
HCS 2024 and WHMIS: what changes on safety data sheets and labels, and the 19 November 2027 deadline
OSHA updated its Hazard Communication Standard (HCS) on 20 May 2024 to follow a newer edition of the UN's GHS. Manufacturers, importers and distributors had until 19 May 2026 to update safety data sheets and labels for substances, and have until 19 November 2027 for mixtures. Until those dates, either the 2012 or the 2024 version of the standard may be followed. Canada amended its Hazardous Products Regulations (WHMIS) in 2022; the transition ended on 14 December 2025, and Health Canada promotes compliance until 19 November 2027, then enforces on a risk basis.
The dates in the US
| Who | Substances | Mixtures |
|---|---|---|
| Manufacturers, importers and distributors (sheets and labels) | 19 May 2026 | 19 November 2027 |
| Employers (workplace labels, written programme, training) | 20 November 2026 | 19 May 2028 |
OSHA moved these dates by a final rule published on 15 January 2026. Most products sold by formulators are mixtures, so 19 November 2027 is the date that matters for most sheets.
See who the 19 November 2027 deadline affects and what to do before it.
What changes in the US standard
- Classification: new hazard categories, such as category 3 aerosols, desensitized explosives and sub-categories of flammable gases, plus updated precautionary statements.
- Safety data sheets: revised content in sections 2, 3, 9 and 11.
- Trade secrets: where a concentration is withheld as a trade secret, it is given as one of 13 prescribed ranges, the same ranges Canada uses.
- Small containers: shorter labels for containers of 100 ml or less, and of 3 ml or less, when a full label is not feasible, with the full label on the outer package.
- Packages already released for shipment get more flexibility when their label must be updated.
What changed in Canada
- New and changed hazard classes, such as chemicals under pressure, category 3 aerosols and sub-categories of flammable gases.
- New elements on safety data sheets and labels.
- English and French: the safety data sheet and the label must be available in both.
- Concentration ranges for confidential ingredients: the same 13 ranges as the US.
The two rules are close but not the same. A sheet written for the US still needs the Canadian requirements, including French, before it is used in Canada.
Gaps to check on your sheets
- A sheet still in the 2012 format for a mixture you will sell after 19 November 2027.
- Sections 2, 3, 9 or 11 not updated to the 2024 content.
- A withheld concentration given as an exact figure or a free range instead of one of the 13 prescribed ranges.
- A label that doesn't match section 2 of its sheet: pictograms, signal word, hazard and precautionary statements.
- For Canada: no French version of the sheet or label.
The free SDS checker reads a safety data sheet and shows, section by section, what it is missing under HCS 2024 and the amended WHMIS rules, with the source of each finding. The sheet is read once and not stored.
Check a sheet free- Hazard Communication Standard, final rule, 89 FR 44144 (20 May 2024)
- Hazard Communication Standard, compliance dates, final rule (15 January 2026), 29 CFR 1910.1200(j).
- 29 CFR 1910.1200, Hazard Communication, paragraphs (f)(11), (f)(12), (i)(1) and Appendix D.
- OSHA: Hazard Communication Standard questions and answers (2026)
- Health Canada: amendments to the Hazardous Products Regulations
- Hazardous Products Regulations, SOR/2015-17, section 4.4.1 and Schedule 1.
We check these sources every week and update this page when they change.